ABC Aqua PB07M AUTO JoJo Tank Booster Pump Kit 0.75kW 230V with Automatic Controller

R1,749.95

ABC Aqua PB07M AUTO 0.75 kW (1 HP) 230V peripheral pump with automatic pressure controller – a ready-to-go JoJo tank booster kit. Up to 45 L/min and 55 m head. Brass impeller, cast iron body, stainless steel anti-seize inserts.

The controller starts the pump when you open a tap and stops it when you close it – no switching on and off by hand. Ideal backup for municipal water outages.

SKU: 8003023 Category:

Description

The ABC Aqua PB series peripheral pump is a compact, high-pressure pump for a JoJo or rainwater tank, giving you proper mains-like pressure to taps, showers, geysers and garden hoses.

Why the PB series:

  • Brass impeller with evenly arranged radial vanes for high pressure from a small motor
  • Two stainless steel insert rings stop the impeller seizing after the pump has stood unused – important for a backup pump that only runs during outages
  • Cast iron pump body and copper-wound motor for a long service life
  • Factory-fitted automatic controller: starts when a tap opens, stops when it closes, with a pressure gauge and status lights
  • Dry-run protection – the controller switches the pump off if the tank runs empty (Failure light, press Reset once water is back)
  • Comes with an SA 3-pin plug fitted – no electrician needed

Specifications

Model ABC Aqua PB07M AUTO (pump + automatic controller)
Automatic controller ABC Aqua PC-13A, factory-fitted to the pump outlet: pressure gauge, Power / On / Failure lights, Reset button, dry-run protection, 10 A max, 10 bar max, IP65
Plug Supplied with cable and SA 3-pin plug fitted – plug in and go
Power 0.75 kW / 1 HP, 230V single phase, 4.5 A, 2850 rpm, continuous duty
Max flow 45 L/min (2.7 m³/h)
Max head 55 m
Inlet / outlet 1″ x 1″ (25 x 25 mm)
Max suction lift 8 m (with a non-return valve fitted)
Max operating pressure 6 bar
Max liquid temperature 35°C (standard mechanical seal)
Pump Cast iron body and support, brass impeller with radial vanes, 2 stainless steel insert rings
Motor Copper winding, stainless steel 410 shaft, built-in thermal overload protection, IP54, insulation class B, max ambient 40°C
Pump weight approx. 10 kg

Installation tips: mount the pump level with or below the bottom of the tank where possible, fill the pump with water before the first start, and never run it dry. Fit a non-return valve if the pump has to lift water.

Supplied by ABC Pumps, a South African pump distributor. Free delivery on orders of R1,000 and above.

Additional information

Weight 11 kg
Dimensions 34 × 18 × 45 cm

Reviews

There are no reviews yet.

Be the first to review “ABC Aqua PB07M AUTO JoJo Tank Booster Pump Kit 0.75kW 230V with Automatic Controller”

Your email address will not be published. Required fields are marked *